= CHAPTER 72 - IRON AND STEEL =

* For further details please check the ABS website, https://www.abs.gov.au/statistics/classifications/australian-harmonized-export-commodity-classification-ahecc

----

||'''Chapter'''||'''Heading'''||'''HS Code'''||'''AHECC'''||'''UQ'''||'''Description'''||
||72|| || || || ||IRON AND STEEL||
|| || || || || || ||
|| || || || || ||SUB-CHAPTER I - PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM||
|| || || || || || ||
|| ||7201|| || || ||PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS:||
|| || ||720110||72011000||T||- Non-alloy pig iron containing by weight 0.5% or less of phosphorus||
|| || ||720120||72012000||T||- Non-alloy pig iron containing by weight more than 0.5% of phosphorus||
|| || ||720150||72015000||T||- Alloy pig iron; spiegeleisen||
|| || || || || || ||
|| ||7202|| || || ||FERRO-ALLOYS:||
|| || ||72021|| || ||- Ferro-manganese:||
|| || ||720211||72021100||T||-- Containing by weight more than 2% of carbon||
|| || ||720219||72021900||T||-- Other||
|| || ||72022|| || ||- Ferro-silicon:||
|| || ||720221||72022100||T||-- Containing by weight more than 55% of silicon||
|| || ||720229||72022900||T||-- Other||
|| || ||720230||72023000||T||- Ferro-silico-manganese||
|| || ||72024|| || ||- Ferro-chromium:||
|| || ||720241||72024100||T||-- Containing by weight more than 4% of carbon||
|| || ||720249||72024900||T||-- Other||
|| || ||720250||72025000||T||- Ferro-silico-chromium||
|| || ||720260||72026000||T||- Ferro-nickel||
|| || ||720270||72027000||T||- Ferro-molybdenum||
|| || ||720280||72028000||T||- Ferro-tungsten and ferro-silico-tungsten||
|| || ||72029|| || ||- Other:||
|| || ||720291||72029100||T||-- Ferro-titanium and ferro-silico-titanium||
|| || ||720292||72029200||T||-- Ferro-vanadium||
|| || ||720293||72029300||T||-- Ferro-niobium||
|| || ||720299||72029900||T||-- Other||
|| || || || || || ||
|| ||7203|| || || ||FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING A MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS:||
|| || ||720310||72031000||T||- Ferrous products obtained by direct reduction of iron ore||
|| || ||720390||72039000||T||- Other||
|| || || || || || ||
|| ||7204|| || || ||FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL:||
|| || ||720410||72041000||T||- Waste and scrap of cast iron||
|| || ||72042|| || ||- Waste and scrap of alloy steel:||
|| || ||720421||72042101||T||-- Of stainless steel||
|| || ||720429||72042912||T||-- Other||
|| || ||720430||72043001||T||- Waste and scrap of tinned iron or steel||
|| || ||72044|| || ||- Other waste and scrap:||
|| || ||720441||72044100||T||-- Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles||
|| || ||720449||72044901||T||-- Other||
|| || ||720450||72045000||T||- Remelting scrap ingots||
|| || || || || || ||
|| ||7205|| || || ||GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL:||
|| || ||720510||72051000||T||- Granules||
|| || ||72052|| || ||- Powders:||
|| || ||720521||72052100||T||-- Of alloy steel||
|| || ||720529||72052900||T||-- Other||
|| || || || || || ||
|| || || || || ||SUB-CHAPTER II - IRON AND NON-ALLOY STEEL||
|| || || || || || ||
|| ||7206|| || || ||IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF 7203):||
|| || ||720610||72061000||T||- Ingots||
|| || ||720690||72069000||T||- Other||
|| || || || || || ||
|| ||7207|| || || ||SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL:||
|| || ||72071|| || ||- Containing by weight less than 0.25% of carbon:||
|| || ||720711||72071100||T||-- Of rectangular (including square) cross-section, the width measuring less than twice the thickness||
|| || ||720712||72071200||T||-- Other, of rectangular (other than square) cross-section||
|| || ||720719||72071900||T||-- Other||
|| || ||720720||72072000||T||- Containing by weight 0.25% or more of carbon||
|| || || || || || ||
|| ||7208|| || || ||FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, HOT-ROLLED, NOT CLAD, PLATED OR COATED:||
|| || ||72081|| || ||- In coils, not further worked than hot-rolled, of a thickness of less than 3 mm and having a minimum yield point of 275 MPa, or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa:||
|| || ||720810||72081000||T||-- In coils, not further worked than hot-rolled, with pattern in relief||
|| || ||72082|| || ||- Other, in coils, not further worked than hot-rolled, pickled:||
|| || ||720825||72082500||T||-- Of a thickness of 4.75 mm or more||
|| || ||720826||72082600||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||720827||72082700||T||-- Of a thickness of less than 3 mm||
|| || ||72083|| || ||- Other, in coils, not further worked than hot-rolled:||
|| || ||720836||72083600||T||-- Of a thickness exceeding 10 mm||
|| || ||720837||72083700||T||-- Of a thickness of 4.75 mm or more but not exceeding 10 mm||
|| || ||720838||72083800||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||720839||72083900||T||-- Of a thickness of less than 3 mm||
|| || ||72084|| || ||- Other, not in coils, not further worked than hot-rolled:||
|| || ||720840||72084000||T||-- Not in coils, not further worked than hot-rolled, with patterns in relief||
|| || ||72085|| || ||- Other, not in coils, not further worked than hot-rolled:||
|| || ||720851||72085100||T||-- Of a thickness exceeding 10 mm||
|| || ||720852||72085200||T||-- Of a thickness of 4.75 mm or more but not exceeding 10 mm||
|| || ||720853||72085300||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||720854||72085400||T||-- Of a thickness of less than 3 mm||
|| || ||720890||72089050||T||- Other||
|| || || || || || ||
|| ||7209|| || || ||FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COLD-ROLLED (COLD-REDUCED), NOT CLAD, PLATED OR COATED:||
|| || ||72091|| || ||- In coils, not further worked than cold-rolled (cold-reduced):||
|| || ||720915||72091500||T||-- Of a thickness of 3 mm or more||
|| || ||720916||72091600||T||-- Of a thickness exceeding 1 mm but less than 3 mm||
|| || ||720917||72091700||T||-- Of a thickness of 0.5 mm or more but not exceeding 1 mm||
|| || ||720918||72091800||T||-- Of a thickness of less than 0.5 mm||
|| || ||72092|| || ||- Not in coils, not further worked than cold-rolled (cold-reduced):||
|| || ||720925||72092500||T||-- Of a thickness of 3 mm or more||
|| || ||720926||72092600||T||-- Of a thickness exceeding 1 mm but less than 3 mm||
|| || ||720927||72092700||T||-- Of a thickness of 0.5 mm or more but not exceeding 1 mm||
|| || ||720928||72092800||T||-- Of a thickness of less than 0.5 mm||
|| || ||720990||72099000||T||- Other||
|| || || || || || ||
|| ||7210|| || || ||FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR COATED:||
|| || ||72101|| || ||- Plated or coated with tin:||
|| || ||721011||72101100||T||-- Of a thickness of 0.5 mm or more||
|| || ||721012||72101200||T||-- Of a thickness of less than 0.5 mm||
|| || ||721020||72102000||T||- Plated or coated with lead, including terne-plate||
|| || ||721030||72103000||T||- Electrolytically plated or coated with zinc||
|| || ||72104|| || ||- Otherwise plated or coated with zinc:||
|| || ||721041||72104100||T||-- Corrugated||
|| || ||721049||72104900||T||-- Other||
|| || ||721050||72105000||T||- Plated or coated with chromium oxides or with chromium and chromium oxides||
|| || ||72106|| || ||- Plated or coated with aluminium:||
|| || ||721061||72106100||T||-- Plated or coated with aluminium-zinc alloys||
|| || ||721069||72106900||T||-- Other||
|| || ||721070||72107000||T||- Painted, varnished or coated with plastics||
|| || ||721090||72109000||T||- Other||
|| || || || || || ||
|| ||7211|| || || ||FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT CLAD, PLATED OR COATED:||
|| || ||72111|| || ||- Not further worked than hot-rolled:||
|| || ||721113||72111300||T||-- Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief||
|| || ||721114||72111400||T||-- Other, of a thickness of 4.75 mm or more||
|| || ||721119||72111991||T||-- Other||
|| || ||72112|| || ||- Not further worked than cold-rolled (cold-reduced):||
|| || ||721123||72112300||T||-- Containing by weight less than 0.25% of carbon||
|| || ||721129||72112900||T||-- Other||
|| || ||721190||72119000||T||- Other||
|| || || || || || ||
|| ||7212|| || || ||FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED OR COATED:||
|| || ||721210||72121000||T||- Plated or coated with tin||
|| || ||721220||72122000||T||- Electrolytically plated or coated with zinc||
|| || ||721230||72123000||T||- Otherwise plated or coated with zinc||
|| || ||721240||72124000||T||- Painted, varnished or coated with plastics||
|| || ||721250||72125000||T||- Otherwise plated or coated||
|| || ||721260||72126000||T||- Clad||
|| || || || || || ||
|| ||7213|| || || ||BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL:||
|| || ||721310||72131001||T||- Containing indentations, ribs, grooves or other deformations produced during the rolling process||
|| || ||721320||72132001||T||- Other, of free-cutting steel||
|| || ||72139|| || ||- Other:||
|| || ||721391||72139100||T||-- Of circular cross-section measuring less than 14 mm in diameter||
|| || ||721399||72139900||T||-- Other||
|| || || || || || ||
|| ||7214|| || || ||OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL, NOT FURTHER WORKED THAN FORGED, HOT-ROLLED, HOT-DRAWN OR HOT-EXTRUDED, BUT INCLUDING THOSE TWISTED AFTER ROLLING:||
|| || ||721410||72141001||T||- Forged||
|| || ||721420||72142001||T||- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling||
|| || ||721430||72143001||T||- Other, of free-cutting steel||
|| || ||72149|| || ||- Other:||
|| || ||721491||72149100||T||-- Of rectangular (other than square) cross-section||
|| || ||721499||72149900||T||-- Other||
|| || || || || || ||
|| ||7215|| || || ||OTHER BARS AND RODS OF IRON OR NON-ALLOY STEEL:||
|| || ||721510||72151001||T||- Of free-cutting steel, not further worked than cold-formed or cold-finished||
|| || ||721550||72155000||T||- Other, not further worked than cold-formed or cold-finished||
|| || ||721590||72159001||T||- Other||
|| || || || || || ||
|| ||7216|| || || ||ANGLES, SHAPES AND SECTIONS OF IRON OR NON-ALLOY STEEL:||
|| || ||721610||72161000||T||- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm||
|| || ||72162|| || ||- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:||
|| || ||721621||72162100||T||-- L sections||
|| || ||721622||72162200||T||-- T sections||
|| || ||72163|| || ||- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:||
|| || ||721631||72163100||T||-- U sections||
|| || ||721632||72163200||T||-- I sections||
|| || ||721633||72163300||T||-- H sections||
|| || ||721640||72164000||T||- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more||
|| || ||721650||72165000||T||- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded||
|| || ||72166|| || ||- Angles, shapes and sections, not further worked than cold-formed or cold-finished:||
|| || ||721661||72166100||T||-- Obtained from flat-rolled products||
|| || ||721669||72166900||T||-- Other||
|| || ||72169|| || ||- Other:||
|| || ||721691||72169100||T||-- Cold-formed or cold-finished from flat-rolled products||
|| || ||721699||72169900||T||-- Other||
|| || || || || || ||
|| ||7217|| || || ||WIRE OF IRON OR NON-ALLOY STEEL:||
|| || ||721710||72171000||T||- Not plated or coated, whether or not polished||
|| || ||721720||72172000||T||- Plated or coated with zinc||
|| || ||721730||72173000||T||- Plated or coated with other base metals||
|| || ||721790||72179000||T||- Other||
|| || || || || || ||
|| || || || || ||SUB-CHAPTER III - STAINLESS STEEL||
|| || || || || || ||
|| ||7218|| || || ||STAINLESS STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF STAINLESS STEEL:||
|| || ||721810||72181000||T||- Ingots and other primary forms||
|| || ||72189|| || ||- Other:||
|| || ||721891||72189100||T||-- Of rectangular (other than square) cross-section||
|| || ||721899||72189900||T||-- Other||
|| || || || || || ||
|| ||7219|| || || ||FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF 600 MM OR MORE:||
|| || ||72191|| || ||- Not further worked than hot-rolled, in coils:||
|| || ||721911||72191100||T||-- Of a thickness exceeding 10 mm||
|| || ||721912||72191200||T||-- Of a thickness of 4.75 mm or more but not exceeding 10 mm||
|| || ||721913||72191300||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||721914||72191400||T||-- Of a thickness of less than 3 mm||
|| || ||72192|| || ||- Not further worked than hot-rolled, not in coils:||
|| || ||721921||72192100||T||-- Of a thickness exceeding 10 mm||
|| || ||721922||72192200||T||-- Of a thickness of 4.75 mm or more but not exceeding 10 mm||
|| || ||721923||72192300||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||721924||72192400||T||-- Of a thickness of less than 3 mm||
|| || ||72193|| || ||- Not further worked than cold-rolled (cold-reduced):||
|| || ||721931||72193100||T||-- Of a thickness of 4.75 mm or more||
|| || ||721932||72193200||T||-- Of a thickness of 3 mm or more but less than 4.75 mm||
|| || ||721933||72193300||T||-- Of a thickness exceeding 1 mm but less than 3 mm||
|| || ||721934||72193400||T||-- Of a thickness of 0.5 mm or more but not exceeding 1 mm||
|| || ||721935||72193500||T||-- Of a thickness of less than 0.5 mm||
|| || ||721990||72199000||T||- Other||
|| || || || || || ||
|| ||7220|| || || ||FLAT-ROLLED PRODUCTS OF STAINLESS STEEL, OF A WIDTH OF LESS THAN 600 MM:||
|| || ||72201|| || ||- Not further worked than hot-rolled:||
|| || ||722011||72201100||T||-- Of a thickness of 4.75 mm or more||
|| || ||722012||72201200||T||-- Of a thickness of less than 4.75 mm||
|| || ||722020||72202000||T||- Not further worked than cold-rolled (cold-reduced)||
|| || ||722090||72209000||T||- Other||
|| || || || || || ||
|| ||7221||722100||72210001||T||BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF STAINLESS STEEL||
|| || || || || || ||
|| ||7222|| || || ||OTHER BARS AND RODS OF STAINLESS STEEL; ANGLES, SHAPES AND SECTIONS OF STAINLESS STEEL:||
|| || ||72221|| || ||- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:||
|| || ||722211||72221100||T||-- Of circular cross-section||
|| || ||722219||72221900||T||-- Other||
|| || ||722220||72222001||T||- Bars and rods, not further worked than cold-formed or cold-finished||
|| || ||722230||72223001||T||- Other bars and rods||
|| || ||722240||72224001||T||- Angles, shapes and sections||
|| || || || || || ||
|| ||7223||722300||72230000||T||WIRE OF STAINLESS STEEL||
|| || || || || || ||
|| || || || || ||SUB-CHAPTER IV - OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL||
|| || || || || || ||
|| ||7224|| || || ||OTHER ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS; SEMI-FINISHED PRODUCTS OF OTHER ALLOY STEEL:||
|| || ||722410||72241001||T||- Ingots and other primary forms||
|| || ||722490||72249001||T||- Other||
|| || || || || || ||
|| ||7225|| || || ||FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE:||
|| || ||72251|| || ||- Of silicon-electrical steel:||
|| || ||722511||72251100||T||-- Grain-oriented||
|| || ||722519||72251900||T||-- Other||
|| || ||722530||72253030||T||- Other, not further worked than hot-rolled, in coils||
|| || ||722540||72254040||T||- Other, not further worked than hot-rolled, not in coils||
|| || ||722550||72255050||T||- Other, not further worked than cold-rolled (cold-reduced)||
|| || ||72259|| || ||- Other:||
|| || ||722591||72259110||T||-- Electrolytically plated or coated with zinc||
|| || ||722592||72259220||T||-- Otherwise plated or coated with zinc||
|| || ||722599||72259930||T||-- Other||
|| || || || || || ||
|| ||7226|| || || ||FLAT-ROLLED PRODUCTS OF OTHER ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM:||
|| || ||72261|| || ||- Of silicon-electrical steel:||
|| || ||722611||72261100||T||-- Grain-oriented||
|| || ||722619||72261900||T||-- Other||
|| || ||722620||72262000||T||- Of high speed steel||
|| || ||72269|| || ||- Other:||
|| || ||722691||72269100||T||-- Not further worked than hot-rolled||
|| || ||722692||72269200||T||-- Not further worked than cold-rolled (cold-reduced)||
|| || ||722699|| || ||-- Other:||
|| || || ||72269918||T||--- Electrolytically plated or coated with zinc||
|| || || ||72269990||T||--- Other||
|| || || || || || ||
|| ||7227|| || || ||BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF OTHER ALLOY STEEL:||
|| || ||722710||72271001||T||- Of high speed steel||
|| || ||722720||72272001||T||- Of silico-manganese steel||
|| || ||722790||72279000||T||- Other||
|| || || || || || ||
|| ||7228|| || || ||OTHER BARS AND RODS OF OTHER ALLOY STEEL; ANGLES, SHAPES AND SECTIONS, OF OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL:||
|| || ||722810||72281001||T||- Bars and rods, of high speed steel||
|| || ||722820||72282001||T||- Bars and rods, of silico-manganese steel||
|| || ||722830||72283001||T||- Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded||
|| || ||722840||72284001||T||- Other bars and rods, not further worked than forged||
|| || ||722850||72285000||T||- Other bars and rods, not further worked than cold-formed or cold-finished||
|| || ||722860||72286001||T||- Other bars and rods||
|| || ||722870||72287001||T||- Angles, shapes and sections||
|| || ||722880||72288000||T||- Hollow drill bars and rods||
|| || || || || || ||
|| ||7229|| || || ||WIRE OF OTHER ALLOY STEEL:||
|| || ||722920||72292001||T||- Of silico-manganese steel||
|| || ||722990|| || ||- Other:||
|| || || ||72299011||T||-- Of high speed steel||
|| || || ||72299092||T||-- Other||